Connect with us

Hi, what are you looking for?

ALIAALIA




Equipment News

Martin Launches Exterior 200 LED Fixture

The Exterior 200 LED is a long-life programmable luminaire offering full RGB + Amber and White colour mixing. Weatherproofed for the dynamic illumination of façades, structures, water features and monuments, it features a comprehensive colour range from 44 high power LEDs and choice of optional spread angles.

Housed in a beautifully designed weatherproof casing, the Exterior 200 LED is perfect for applications where projection distance is limited and is the ideal short-throw complement to the existing Martin Exterior range.

Stylishly slim, the Exterior 200 LED can be tucked discreetly into architectural design details of buildings or any other illumination structure and requires minimal service and maintenance. An IP65 rating means the Exterior 200 LED can withstand even the toughest outdoor conditions.

With five coloured diodes (Red, Green, Blue, Amber and White) instead of the usual three, the Exterior 200 LED is able to offer a broader and finer range of colours. A greater variety of colour shades and brighter saturated colours are possible compared to CMY systems. While the amber helps extend the colour range and give effective colour temperature control, the white diode provides a better white light quality and the ability to create softer, subtler pastels.

The Exterior 200 LED is available in a choice of narrow, medium or wide beam options for use at distances between approximately two to six meters (6 to 20 ft). The lenses are also available as accessories, allowing the luminaire to be reconfigured on site if necessary. When used without a diffuser lens, an even narrower beam can be achieved.

Martin set out to solve what has been one of the major drawbacks of LED lighting: colour consistency. A central feature of the Exterior 200 LED is the ability to create even and consistent colorus. Pixel boards for the Exterior 200 LED are individually measured and calibrated, guaranteeing standardized brightness and colour performance.

The Exterior 200 LED is controlled by industry standard DMX, can function as a stand-alone unit or be synchronized (master/slave). To give maximum flexibility, Martin has provided four distinct DMX control modes – RGB, RGBAW, HSI (Hue, Saturation, Intensity), HSIC (Hue, Saturation, Intensity, Colour Temperature). This gives the option of simple and effective control, economizing on channels, or full comprehensive control when a designer needs it.

With an auto sensing switch mode power supply and simple lens and LED access when needed, the Exterior 200 LED is virtually trouble-free. A built-in light sensor, internal timer and 20 stand-alone memory presets add to its independent functionality.

Requiring little service and maintenance, the Exterior 200 LED incorporates the same tough, extruded aluminum housing and attractive design as the Exterior 200 that allows it to fit safely and discreetly into virtually any environment.

www.martin.com

Australian Distributor: Show Technology www.showtech.com.au

Click to comment

You must be logged in to post a comment Login

Leave a Reply

Sign up for ALIA Newsletter

* = required field

powered by MailChimp!

Connect With Us

Latest

Employment News

Advertised Vacancy Number: IPS/SS885991 This is a permanent part-time (0.4FTE) position commencing Term 2, 2024 Perth Modern School is seeking a dynamic and motivated...

Support