Connect with us

Hi, what are you looking for?

ALIAALIA




Equipment News

Artistic Licence to unveil sunDial

Artistic Licence Engineering is set to launch sunDial, a range of modular lighting controllers for smart illumination, at ISE 2013 (stand 8-R232). The display will highlight the mix-and-match versatility of the sunDial range, using DMX and DALI controllers to drive various sources, including mains-powered lighting and the latest in LED technology.

The landscape of lighting is evolving towards a greener future, but the introduction of more eco-friendly sources such as LED is just part of the story. Only by using and controlling fixtures in a more intelligent manner can we harness the full potential of the smart approach to lighting, says the company.

Artistic Licence Engineering’s sunDial range provides the technology to make this happen. To ensure maximum versatility, the MC80-DMX and MC64-DALI controllers respectively accept DMX512 and DALI input data. These units can be paired with sunDial output modules, which provide ‘source agnostic’ dimming for every fixture from incandescent to solid-state.

Demonstrating this versatility in action, the sunDial ML4000 leading-edge mains dimmer will be driving an ‘eco-halogen’ source, while the OIL448 low voltage dimmer will be driving high-power LED and the latest in OLED technology, the Philips Lumiblade GL350.

The ML4000 is equipped with four output channels, each dimming European mains voltages at 250W, giving 1KW in total. The input is protected with a cartridge fuse, and the outputs with electronic cut-outs.

The OIL448 also provides four outputs, which automatically adjust to the user-supplied DC supply in the range 12-48V. This allows series chains of high power LEDs to be controlled and dimmed. Each output can be user-selected to operate at either 350mA or 700mA, for driving 1W and 3W LEDs respectively.

The ‘smart’ aspect of the range is highlighted by the in-built DMX remote device management (RDM) or DALI back-channel. These protocols enable the controllers to not only tell the fixture what to do, but also listen to its environment. Such feedback provides intelligent monitoring of installations, allowing the implementation of automated fault reporting and energy conserving programmes.

www.artisticlicence.com

Artistic Licence Engineering is set to launch sunDial, a range of modular lighting controllers for smart illumination, at ISE 2013 (stand 8-R232). The display will highlight the mix-and-match versatility of the sunDial range, using DMX and DALI controllers to drive various sources, including mains-powered lighting and the latest in LED technology.
The landscape of lighting is evolving towards a greener future, but the introduction of more eco-friendly sources such as LED is just part of the story. Only by using and controlling fixtures in a more intelligent manner can we harness the full potential of the smart approach to lighting, says the company.
Artistic Licence Engineering’s sunDial range provides the technology to make this happen. To ensure maximum versatility, the MC80-DMX and MC64-DALI controllers respectively accept DMX512 and DALI input data. These units can be paired with sunDial output modules, which provide ‘source agnostic’ dimming for every fixture from incandescent to solid-state.
Demonstrating this versatility in action, the sunDial ML4000 leading-edge mains dimmer will be driving an ‘eco-halogen’ source, while the OIL448 low voltage dimmer will be driving high-power LED and the latest in OLED technology, the Philips Lumiblade GL350.
The ML4000 is equipped with four output channels, each dimming European mains voltages at 250W, giving 1KW in total. The input is protected with a cartridge fuse, and the outputs with electronic cut-outs.
The OIL448 also provides four outputs, which automatically adjust to the user-supplied DC supply in the range 12-48V. This allows series chains of high power LEDs to be controlled and dimmed. Each output can be user-selected to operate at either 350mA or 700mA, for driving 1W and 3W LEDs respectively.
The ‘smart’ aspect of the range is highlighted by the in-built DMX remote device management (RDM) or DALI back-channel. These protocols enable the controllers to not only tell the fixture what to do, but also listen to its environment. Such feedback provides intelligent monitoring of installations, allowing the implementation of automated fault reporting and energy conserving programmes.
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Sign up for ALIA Newsletter

* = required field

powered by MailChimp!

Connect With Us

Latest

Employment News

Advertised Vacancy Number: IPS/SS885991 This is a permanent part-time (0.4FTE) position commencing Term 2, 2024 Perth Modern School is seeking a dynamic and motivated...

Support